Your cart is empty

USB Small equipment for 915MHz UHF RFID Reader - EPC GEN-2


Introduction and Application

E_RFID915M_0811 UHF RFID integrated card reader is contactless desktop reader and access control reader,which apply to center management department.It adopts advanced radio wave reception design and embedded micro controller in coordination with efficient decoding algorithm to finish the receiving EPC GEN 2 card.
This reader has many advantages of high sensitivity,low working current,low cost and stability etc.Access control reader apply to access control,checking attendance and charging etc. This reader is widely used in all kinds of RFID system.
Logistics and Warehouse management;
Parking control system;
Manufacturing management;
Products anti-counterfeiting detection;
Other field: club management,library,student schoolrolls,attendence management and swimming pool system etc.
  • Low power, stable reading and writing distance;
  • Fast datas reading speed;
  • More labels be read at same time;
  • More protocols supporting;
  • Compact design and waterproof.
  • Working FrequencyNational standard920~925MHz)、America standard (902~928MHz) or customize other frequency
  • Support ProtocolISO18000-6BISO18000-6CEPC GEN2
  • Frequency HoppingFHSSor fixed frequency set by software
  • Working Wayautomatically reading card at regular time, can set reading card way
  • Frequency Power0~18dBmbe adjusted by software
  • Reading Distance0.20.5 meter
  • Reading Sensitivitydual polarization reading
  • Reading Speedone label 64bit ID number <6ms
  • Antennacircular polariztion antenna
  • InterfaceRS485RS232Wiegand26Wiegand34USB
  • Working VoltageDC12V
  • Working Status Indicationbuzzer
  • Power1W
  • Working Temperature:-20℃ ~ +80
  • Storage Temperature:-40℃ ~ +125
  • Working Humidity20~ 95%(no condensing
  • Dimension170mm×105mm×42mm
Using Explanation
The UHF RFID reader start to work when the buzzer makes a sound,when the tag approach the reader,the buzzer makes a sound again to indicate transmitting datas.The time interval which between two times of reading one IC card is set by software.After read card, the IC card will not make any indication and not transmit datas if it is still in RFID reader field,but if exceed the time interval,or other ID cards in RFID reader filed, the reader will read cards and transmit datas.
The UHF RFID reader use radio influence technology,avoid to approach the metal as far as possible when using it.The radio wave will be affected by metal and reading distance will be shorted when reader approach to metal.The UHF RFID reader installation position should be far away from motor and transformer etc, to reduce the impact on reader.
E-RFID915M-0811 reader support E-RFID915M-0211 and E-RFID915M-0311, compatible with Wiegand 26 bits/Wiegand 34 bits/RS232/RS485/USB.
E-RFID915M-0811 reader is mainly used in parking lot.
E-RFID915M-0811 reader provides SDK with demo of VB and VC.

915MHz UHF RFID Reader SDK download:

  1. 915MHz UHF RFID Reader User Manul
  2. 915MHz UHF RFID Reader SDK

  • Model: E_RFID915M_0811
  • Shipping Weight: 500g
  • 100 Units in Stock
  • Manufactured by: Eleckits Studio

This product was added to our catalog on Monday 12 December, 2011.

There are currently no product reviews.

Write Review